Vante 3120, Инструкция по эксплуатации, Страница: 16 / 20

Vante
™
Model 3120
8
CAUTION: Excessive RF dwell time may cause permanent damage to the
Generator.
WARNING: Sealing is not recommended for tubing filled with flammable or
other hazardous materials.
2.2.4 Be sure that the materials to be sealed, formed or welded are clean and dry.
Perform the operation and evaluate the result.
2.2.5 Adjust the power, dwell time and/or air supply settings, if applicable, as
needed to obtain the desired seal/form/weld quality. Only slight adjustments to
the recommended setting should be required.
2.2.6 Once the desired result is obtained, continue to perform the sealing,
forming or welding operation as needed.
NOTE: The RF Generator is equipped with a thermal protection circuit which
will cause the unit to shut down if unusually high levels of usage occur
or tuning is mismatched. In such case, the power-on light on the front
of the panel will remain illuminated, the fan will continue to run, but
there will be no RF power output. Wait several minutes for the unit to
cool and proceed with sealing/forming/welding operations at a rate
that will not cause generator shutdown. If problem persists, contact
Vante™ for other possible solutions.