Vantage Hearth Equinox 41 EQ41TB-TI, Руководство по установке

Страница: 3 / 4

I N S T A L L A T I O N
©Vantage, 8/16/2016 / IS-0583-B Equinox 41 LCD Keypad – MODEL: EQ41TB-TI page 3 of 4
4.

Select the device option from the settings menu.
NOTE: The other pages are covered in the
Equinox Widgets_install.pdf installation sheet and
in Design Center Help.
5.
NOTE: The first time the controller is programmed, the Equinox 41 device should use the
brightness settings specified in the Equinox Widget Styles object in Design Center.
Subsequent system downloads depend on whether or not the Read and Restore –
Equinox Profiles and User Data is checked. When checked, it will retain the brightness
settings on the device. When unchecked, it will use the brightness settings specified in
the
Equinox Widget Styles object in Design Center.
The
device screens are accessed by swiping up or down to see all device settings.

brightness

Press the plus or minus buttons to set the active brightness level. The active brightness
level is used when interacting with the touchscreen.

Press the plus or minus buttons to set the inactive brightness level. The inactive
brightness level is used when the touchscreen is not in use and the screen timeout setting
has expired.

brightness options

auto mode – uses ambient light to enhance the screen’s brightness level in active mode.

auto mode calibration – the settings only appear when auto mode is selected.

low trim – (range 1% to 25%) if screen is too dim when used in a dark room,
increase the low trim setting and conversely when screen is too bright.

adjust – (range, -5 to +5) if screen is too dim when used in a moderately lit room,
increase the adjust setting and conversely when screen is too bright.

off when dark – when ambient light is very low and the screen has entered inactive mode,
the screen’s illumination turns off saving power .

screen timeout – adjusts from 1 to 10 minutes (60 to 600 seconds).
NOTE: Adjustments take a few seconds for the screen brightness to change. This delay action is
deliberate to avoid sudden changes in screen brightness.
6.

Scroll down to the next device screen for:

security sounder volume –

set security sound level from 0% to 100% - sound is on the Equinox security pad
display..

multiple homes –

Selecting multiple homes allows this device to connect to more than one home.
NOTE: multiple homes is covered in Design Center Help.

default profile –

When the device is reset, (power outage, etc.) this selects whether the first
(enabled) profile in the profile list or the last (enabled) used profile is active when
the screen boots.