SECTION 1 - DMM-4S(T) Quick Setup
DMM-4S(T)
DDM-4S
Digital Music Manager
Page 2
Quick Guide
V39934 © 2009
Step 1
- Required Connections
!
Connect to the local Network via a standard RJ-45 Ethernet Cable to a network port
!
Connect the Analog Left and Right source outputs to a Vantage Axium or to your Hi-Fi Stereo pre-amp
inputs
"
NOTE: It is not necessary to connect all 4 sources
-
Connection of at least one Output source is required to monitor playback
!
Optional, Connect one of the sources to an Sony/Philips Digital Interface (S/PDIF) Device
"
See
SECTION 6 - External and Docked Devices
in the DMM User Guide for instructions to assign one
of the four sources to the S/PDIF output.
!
Connect the Power Supply Adaptor
"
Because the Vantage DMM-4S(T) is computer based hardware containing a large internal hard-drive
and other computer components, Vantage strongly recommends connecting it to a quality Power
Conditioner/Power Surge protector. This will increase protection from unwanted surges in the power
line.
Step 2
- Optional Connections
The VGA/Composite monitor options are only needed if the
Local User Interface
is going to be used.
!
Connect a standard or USB mouse and keyboard* -
Optional if using the Local User Interface
*NOTE: A keyboard is not absolutely needed as the Local User Interface has an on screen keyboard, but a
connected keyboard will make interfacing easier and faster.
!
Connect any VGA compatible monitor
or
connect a TV to the composite video-
Either is required when
using the Local User Interface
