Van's Aircraft RV 12iS, Процедуры приемки продукции

Страница: 26 / 50

Revision: 2.3 Date: 10/30/20
T1-2

Hold the stall warning vane in the “ON” position. This can be accomplished by placing an
ATC fuse beneath the vane or by using tape.

Re-start engine and verify proper engine and systems operation following POH procedures.

Increase the RPM to 4000 RPM.

Check that the Stall Warning audio tone level is loud enough to function as a warning with the
engine running and is louder than all other audio inputs.

After shut down make any final adjustments to audio levels.
Section T1 checks completed by:
Printed Name/Title Aircraft Serial Number
Signature Date