User manual
Tavara Balance 16.05
4
MIN INSERT
Specific safety parts should
always
be replaced by new parts!
Adjustment of the bicycle
Before using the bicycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the bicycle, as defined in the instructions, is not
possible, you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during
periodic maintenance.
Take care that fingers and limbs do not get trapped while adjusting the
bicycle.
Saddle height
When the cyclist is sitting on the bicycle and
can put a foot on the pedal in the lowest
position, the saddle height is correct. Adjust
the saddle height in such a way that the leg is
stretched but relaxed in that position.
To adjust the saddle:
1. Loosen the screw [A].
2. Slide the saddle to the correct height.
3. Tighten the screw.
Do
not
pull out the saddle pin
further
than the mark.
The tube will not go into the shank deep enough and
will risk breaking off, which can lead to serious
injuries.
