User manual | Fun2Go and Funtrain 18.06
8
off
on
auto
Adjusting the headlight
Set the angle of the headlight such that
the centre of the light beam falls
approximately ten meters ahead of the bike.
Replacing batteries
The headlight works on batteries. When the
batteries are almost empty, a red LED light
flashes on the headlight. Follow the next steps
to replace the batteries.
1. Remove the two screws at the back of the
front light.
2. Dismantle the rear cover by pressing with
the thumb and index finger at the cavity on
both sides of the front cover and pulling the
rear cover back.
2.
1.
