6
Size & packaging
6.1
Size:
When the turn-on time and turn-off time are the same or turn-on time is smaller than the turn-off
time, the timer will automatically turn off, and no manual operation is required.
5.3
Timer Turn on and turn off
Long press the "Time set" button, The system time value will flash, press the up and down buttons
to calibrate the time, and press the left and right buttons to switch between hours and minutes.
5.4
Set the system time
135mm L * 70 mm W * 26mm H
135mm
26mm
70mm
Warning!
!
Do not connect or disconnect the controller with LED light under load.
!
Ensure the power cord and the controller cables do not touch any of the LED bars.
Using a daisy chain setup, a maximum lights can be connected to one controller.
The controller can dim the LED light from 0 to 100%.
• Connect the dimming cable to the dimming port on the first LED light.
• Use dimming cable (T-shape) to connect the dimming port of the following LED light.
• Repeat these steps to connect up to maximum connections.
