Vanpee LED neon flex, Руководство пользователя

Страница: 10 / 16

User Manual version 1 | page 8
General Mounting
LED neon �ex can be fastened to surfaces using appropriate accessories available from
distributor. Please refer to data sheets or contact technical support for a copy. The
use of glues and resins as �xing agents should be avoided. Use of glues and resins
may invalidate the warranty of the product, unless it’s use is agreed in writing by
distributor as part of a detailed project speci�cation.
The images indicate one type of �xing available in the accessories range. The different
�xings serve obvious purposes, however when in doubt technical support should be
contacted.
Quantities of accessories and �xings are dependent on the type and its effect on the
variant
it’s being used with. Care should be taken to ensure drooping is avoided, �ex
and to ensure that is fastened adequately to avoid stresses on itself. neon �ex product
Aluminum pro�le
Installation surface Screw
(Wood or concrete wall)
Installation direction
Installation direction
Installation direction
Press the � ex light into mounted aluminum channel in one direction.
Mount the cable junction in hermetic enclosure
like waterproof junction box in outdoor application.
Waterproof
connector or
junction box
Incorrect installation like below picture could lead to light failure.
<100mm
>100mm
>10mm
>10mm
Do not bend against light terminals;
otherwise it will lead to failure of
connector waterproof.
Pull
>10mm
Ensure the feeding cable not bear force,
keep the head10mm in natural loose.
Power Supply
The aluminum mounting piece of IP67 front connector and end cap should keep
at least10mm space apart from aluminum channel when making installation.