Owner's Manual
VCS12/24 Battery Charger
Page 8
The cables must be passed through the appropriate cover holes & secured in
strain relief bushes as shown below:
5) Charging method
The charging status is indicated by two of three LEDs as shown below:
The charger will automatically switch between a float charge output voltage & a
bulk charge output voltage depending on load conditions.
At start up, the charger is in float mode & the green LED will be illuminated. If the
load current exceeds ~75% of full load for more than 10 seconds, then the
charger will switch to bulk charge mode, increasing the output voltage &
illuminating the yellow LED.
+
-
CONNECTION END VIEW
Holes for 3 x ¾" + 1 x ½" strain relief bushes
Remote
indication
AC input
DC output
FAN END VIEW
yellow:
bulk,
absorption
green:
float
red;
over temperature
