Vanguard VYD18NRB Скачать руководство пользователя страница 31

www.fmiproducts.com

113093-01J

31

ACCESSORIES

NOTICE: All accessories may 
not be available for all fireplace 
models.

Purchase these accessories from your local 
dealer. If they can not supply these accessories, 
call FMI PRODUCTS, LLC at 1-866-328-4537 
for referral information. You can also write to 
the address listed on the back page of this 
manual.

FIREPLACE HOOD

Black - GA6050
Antique Brass - GA6053
For all models.

 Helps deflect heat away from 

mantel or wall above fireplace. Fits openings 
28" to 48" wide.

RECEIVER AND HAND-HELD 
REMOTE CONTROL KIT - MLCR 

For all Remote-Ready Models.

 Allows the 

gas log heater to be turned on and off by using 
a hand-held remote control. 

WALL-MOUNT THERMOSTAT 
SWITCH - GWMT1

For all Remote-Ready Models. 

The desired 

comfort setting can be selected on the wall 
thermostat and the log heater will auto-
matically cycle from pilot to the heat setting 
selected. 

WALL-MOUNT ON/OFF SWITCH 
GWMS2

For all Remote-Ready Models.

 Allows the 

gas log heater to be turned on and off with 
a wall switch. 

DAMPER CLAMP - GA6080

For Remote-Ready and Variable Manually-
Controlled Models.

 Permanently opens 

chimney flue damper for vented operation.

LAVA ROCK - GA6060

For all models.

 Order when additional rock 

is desired.

FIRE CRACKLE - CF6-A

For all models.

 Creates the sound of a real 

burning fire.

RECEIVER AND HAND-HELD 
THERMOSTAT REMOTE CONTROL 
KIT - HRC200 

For all Remote-Ready Models.

 Allows the 

gas log heater to be operated in a manually 
or thermostatically controlled mode. You can 
turn the gas log heater on and off without ever 
leaving the comfort of your easy chair. 

Содержание VYD18NRB





































Отзывы: