Vanguard 6500 PLUS Скачать руководство пользователя страница 44

Страница: 44 / 102

2-36

Installation

Installing Nodes in Modulus Enclosures

Requirements for Installing a TRIM Card

Introduction

This section describes the requirements for installing a TRIM card. TRIM cards are
suitable only in a Modulus enclosure and only with 6507

PLUS

and 6525

PLUS

cards.

A 6500

PLUS

node can support only one TRIM card. Modulus 8 and Modulus 9

enclosures can support just one node containing a TRIM card. Modulus 18 and 21
enclosures can support up to three nodes containing TRIM cards.

TRIM Card Upgrade
Kits

The following product codes allow you to upgrade your system for LAN
compatibility:

TRIM-Compatible
Processor Card

Not all 6500

PLUS

processor cards can support the TRIM card. A processor card that

supports a TRIM card has a “LAN COMPATIBLE” label on the lower front panel.
TRIM cards can be physically mounted on all 6500

PLUS

processor cards, but work

only with cards marked “LAN COMPATIBLE.” If your processor card does not
have this marking, see your VanguardMS sales representative to order a LAN-
capable processor card.

In multiple-CPU configurations, only the processor card supporting the TRIM card
needs to be LAN-compatible.

Product

Code

Product

Description

68517

LAN Bridging Software Authorization Key
(SAK)

Accesses the LAN bridging software.

68505

TRIM Card

Provides just the Token Ring Interface
Module card.

68506

6500

PLUS

LAN compatible processor card

upgrade.

Provides a LAN compatible 6500

PLUS

processor card with TRIM card already
attached.

68507

Modulus 9/21 12-port TRIM Package

Includes a TRIM card, a Modulus 9/21 12-
port backplane, and front and rear filler pan-
els.

68514

Modulus 18 RFI Suppression Screen

Required for Modulus 18 installations.

68516

6500

PLUS

TRIM Installation Kit for Modulus

9/21 Enclosures

Provides the front and rear filler panels
needed when you install a TRIM card into
the Modulus 9/21 nest.

68518

6500

PLUS

TRIM Installation Kit for Modulus

8/18 Enclosures

Provides the front and rear filler panels used
when installing a TRIM card into the
Modulus 8/18 nest.

68520

Modulus 21 RFI Suppression Bar

Required for Modulus 21 installations.

Содержание 6500 PLUS







































































































Результаты поиска

Содержание 6500 PLUS

Отзывы:

Бренды по названию

Популярные бренды

Vanguard 6500 PLUS, Руководство по установке

Результаты поиска

Содержание 6500 PLUS

Отзывы:

Бренды по названию

Популярные бренды