TRM-20 AND TRM-40 USER’S MANUAL REV 1.5
46
h.
The following screen will be displayed:
Use the
[PAPER
∧
Contrast]
and
[PAPER
∨
Contrast]
keys to adjust the
reference temperature.
Press the
[ENTER]
key to confirm the reference temperature setting.
i.
The following warning screen will be displayed:
This warning is a reminder that the next sequence of test steps will run current through
the test load.
Press any key to continue.
j.
The following screen will be displayed:
Press the
[START]
key to run the test.
- V1 & V2 TEST -
40 AMP TEST
"START" to RUN TEST
OR
"STOP" TO ABORT
***** WARNING! *****
DANGEROUS FLASH-OVER
WILL OCCUR IF CABLES
ARE DISCONNECTED!
********************
REFERENCE TEMP:
75.0
°
C 167.0
°
F
↑↓
to adjust tk
"ENTER" to accept
