TRM-20 AND TRM-40 USER’S MANUAL REV 1.5
40
p.
After saving the readings, the following screen will be displayed:
Set the LTC or Voltage Regulator tap position to the position indicated on the LCD screen
and press the
[START]
key.
The TRM will continue the test and display the results as in step n.
Repeat steps l
through o
for all “Lower” positions and then through all “Raise” positions.
q.
The following screen will be displayed after the last “Raise” position’s resistance reading
is stored:
1.
YES
Press the
[1]
key (
YES
) to print the test results on the built-in thermal printer. A
Typical LTC/Voltage Regulator test report is shown in Figure 7.
Continue to step
r.
2.
NO
Press the
[2]
key (
NO
) to bypass printing of the test results.
Continue to step r.
r.
The following screen will be displayed:
1.
YES
Press the
[1]
key (
YES
) to save the test record. The following screen will be
displayed:
SAVE THIS RECORD?
1.
YES
2.
NO
PRINT RECORD?
1.
YES
2.
NO
set tap to 2 lower
("START" to CONTINUE)
** XFMR ENERGIZED! **
