VG-ERS200A 200W LED Profile Spot Light User Manual VG-ERS200A 200W LED Profile Spot Light User Manual
The device against rain and moisture
②
Warning note
Power Supply AC100v-240v,50HZ/60HZ
Make sure the power switch is off, the power plug, outlet and the earth connection is
in well condition before connecting the device with the mains
Please use qualified power plug and outlet. Never connect the power cord of this
device with other electrical equipment.
During move and installation. make sure the device not crashed with metal parts and
other materials
Always disconnect from the mains, when the device is on installation and dismantled
The minimum distance between light-output and the illuminated surface must be
more than 50cm
The device must only be installed on a non-flammable surface. In order to safeguard
sufficient ventilation, leave 50 cm of free space around the device. Please note that
heat-sensitive objects may be deformed or damaged by the emitted heat.
During the operation the housing becomes very hot! Do not operate the device for 15
minutes after switching off.
The maximum ambient temperature Ta-45
℃
must never be exceeded. The maximum
housing temperature Tb-80
℃
must never be exceeded
For indoors use
Replace any visible cracked protective shield, filter and lens
The protective shield, filters and lens will require weekly cleaning as smoke “fluid
tends to building up to residues, reducing the light” Can put very quickly.
Ⅲ
INSTALLATION
1.
Installation
When installation, keep the device far away the heat sensitive objects and explosives
sensitive objects, leave at least 50cm of free space around the device.
When installation, keep the device far away the heat sensitive objects and explosives
sensitive objects, leave at least 50cm of free space around the device.
When rigging the devices on the truss and the head face to the floor. Insert the quick-
lock fasteners of the first mounting holder into the respective holes on the bottom of
the device. Tighten the quick-lock fasteners fully clockwise. Install the second
mounting holder. And the safety rope must be used at same time.
05
04
