V&P Scientific, Inc.
3
Technical Note 396C
1.
Place Motor Unit on a sturdy lab bench, table or robotic workstation. Note that Z height with
tube is 156mm (rubber feet not included).
2.
Since Controller Cable is 6 feet long, Controller and computer can be placed at a distance from
the Motor Unit.
3.
Connect Power Cord from Power Supply to an outlet.
4.
Connect Power Cable from Power Supply to Controller.
Warning: Do not plug Controller in while power is on. Ensure that the Power Switch is in the off
position (“0”
is down). Always have Controller plugged in before powering up.
5.
Connect Controller Cable from the Motor Unit to the Controller.
6.
Connect the USB Cable from the Controller to the computer.
7.
Place one VP 830SV-650CFB SpinVessel® tube into the Spin Cup. Ensure that the SpinVessel®
tube is seated securely within the Spin Base.
Controller
Cable
Controller
Motor
Unit
Power
Supply
Power
Cable
Power Cord
USB
Cable
Parts Connected:
Connect
to
Computer