VANDERHALL VENICE 2017, Руководство пользователя

Страница: 83 / 109

83
Jump Starting
Jump Starting
For more information about the vehicle
battery,
SEE
B
ATTERY

74.
If the battery has run down, try to use
another vehicle and some jumper cables to
start your vehicle. Be sure to use the
following steps to do it safely.
Caution
Ignoring these steps could result in
costly damage to the vehicle. Trying to
start the vehicle by pushing or pulling it
will not work, and it could damage the
vehicle.
1. Check the other vehicle. It must
have a 12-volt battery with a
negative ground system.
2. Position the two vehicles so that
they are not touching.
3. Set the parking brake firmly and
put the shift lever in P (Park)
S
EE
S
HIFTING
I
NTO
P
ARK

50
Caution
If any accessories are left on or plugged
in during the jump starting procedure,
they could be damaged. Whenever
possible, turn off or unplug all
accessories connected to either vehicle
before jump starting.
4. Turn the ignition to LOCK/OFF. Turn
off all lights and accessories in both
vehicles, except the hazard warning
flashers if needed.
5. Connect one end of the red positive
(+) cable to the positive (+) terminal
on the discharged battery.
6. Connect the other end of the red
positive (+) cable to the positive (+)
terminal of the good battery.
7. Connect one end of the black negative
(–) cable to the negative (–) terminal
of the good battery
8. Connect the other end of the black
negative (–) cable to the negative (–)
post for the discharged battery
9. Start the engine in the vehicle with the
good battery and run the engine at
idle speed for at least four minutes.
10. Disconnect the jumper cables in the
reverse order (Step 8-5)
11.
Try to start the vehicle that had the
dead battery. If it will not start after a
few tries, it probably needs service.
Warning
An electric fan can start up even when
the engine is not running and can injure
you. Keep hands, clothing, and tools
away from any under hood electric fan.