VANDERHALL VENICE 2017, Руководство пользователя

Страница: 44 / 109

44
A high electrical load occurs when several
of the following are on, such as:
headlamps, high beams, climate control
fan at high speed, heated seats, engine
cooling fans, and loads plugged into
accessory power outlets.
EPM works to prevent excessive discharge
of the battery. It does this by balancing the
generator's output and the vehicle's
electrical needs. It can increase engine idle
speed to generate more power, whenever
needed. It can temporarily reduce the
power demands of some accessories.
Normally, these actions occur in steps or
levels, without being noticeable. In rare
cases at the highest levels of corrective
action, this action may be noticeable to the
driver.
Battery Power Protection
The battery saver feature is designed to
protect the vehicle's battery.
Exterior Lighting Battery Saver
The exterior lamps turn off about 10
minutes after the ignition is turned off
To keep the lamps on for more than 10
minutes, the ignition must be in the
ACC/ACCESSORY or ON/RUN position.