www.vanco1.com
888.769.4156
5
BACK PANEL
1. ISP port
2. LAN port
3. IR extension
4. RS-232 port
5. RS-485 ports
6. IR emitter, corresponding to the Input port from
1 to 16
7. HDMI IN
8. IR receiver to operate with the Receiver
9. Ethernet port to operate with the Receiver
10. RS-232 port to operate work with the Receiver
11. Status of Link: when the UTP cable is connected,
the LED inside lights
12. UTP OUT, connects to the Receiver’s UTP IN
13. ISP port for update
14. Power input
NOTE: RS-232 port, RS-485 port and LAN port are
for matrix control. The LAN port is connected to
the computer via direct UTP and connected to the
router via cross over UTP cable. ISP port is only for
upgrading.
CONNECT AND OPERATE
1. Connect the HDMI input sources, such as HD-
DVD, PS3, STB etc, into the Matrix Switch HDMI
input ports
2. Connect UTP OUT of the Matrix Switch to UTP
IN of Receiver
3. Connect HDMI OUT of Receiver to display
equipment, such as: HD-LCD
4. Connect the Broadband IR receive cable into
Receiver IR RX port and connect the IR emitter
cables into Matrix Switch emitter ports
5. Power on the input source you want to show
6. Plug the power cable into Matrix Switch and turn
on power switch
7. Turn on the display you want to watch
8. Use the remote supplied, or push the buttons on
the front panel, to choose input source, or using
the touch panel, infrared extension receiver, RS-
232, RS-485 or Ethernet LAN port to control
NOTE: IR emitter (IR TX) should be attached as near
the DVD IR receive window
