www.vanco1.com
800.626.6445
13
Upgrade Page
SOFTWARE AND USER INTERFACE
CONTROL VIA RS-232
Upgrading the firmware if needed, available firmware will be posted on the “downloads” tab of the
EVSP14VW’s product page:
http://vanco1.com/catalog/HDMI_253/Evolution-1x4-Multi-Format-Video-Wall-Processor-with-HDMI-Loop-
out_1558
1. Download the available firmware on www.vanco1.com
• Click “Open” and select the firmware file; file path will display where the file is located
• Click “Upgrade” to begin firmware upgrade process
• Any updates, errors, or unsuccessful notifications will display under the “Messages” section
2. The built in Scaler can also be upgraded with available firmware
• Download the available Scaler firmware on www.vanco1.com
• Save the file onto a USB flash or hard drive
• Insert the USB flash or hard drive to the USB port on the EVSP14VW
• Click on “Upgrade Scaler” to begin firmware upgrade process
3. Software Version
• This lets you know which software version(s) your EVSP14VW currently has
WARNING: Any interruption or power interruption during the firmware update process may brick the unit,
ensure consistent power is being used when updating.
