www.vanco1.com
800.626.6445
10
SOFTWARE AND USER INTERFACE
CONTROL VIA RS-232
General Page
The EVSP14VW can be controlled via RS-232, and includes a user interface to do so, simply connect
the included RS-232 cable to a PC running Windows operating system. Windows XP or Windows 7 is
recommended. The software is available to be downloaded from www.vanco1.com, under the “downloads” tab
of the EVSP14VW’s product page:
http://vanco1.com/catalog/HDMI_253/Evolution-1x4-Multi-Format-Video-Wall-Processor-with-HDMI-Loop-
out_1558
Setting the unit up with an IP Address for conrol.
1. Select RS232 COM or TCP mode
2. Select the proper COM of the PC or computer being used to connect to the EVSP14VW
3. Connect/Disconnect the EVSP14VW from the PC or computer
4. Select the proper IP address
5. Connect using the IP address selected
6. Search for an IP address of the EVSP14VW
7. Configure unit IP and MAC address
8. Click to reset to the factory default settings:
• Input source: HDMI
• Output Resolution: 1080p60Hz
• Output mode: HDMI
• Audio Volume: 80
• TV Wall Mode: 1x1
• Bezel correction: X=0,Y=0
