background image

www.vanco1.com

800.626.6445

4

SPECIFICATIONS

TECHNICAL SPECS
Transmitter ............................................................... HDMI input, IR output (3.5mm), IR input 
(3.5mm),RJ45 Ethernet interface, 12V DC in
Receiver ................................................................... HDMI output, IR output (3.5mm), IR input 
(3.5mm),RJ45 Ethernet interface, 12V DC in
Power ....................................................................... <3.5W TX or <2.5W RX
Dimension ................................................................. (L x W x H): 108 x 46 x 35mm
Net weight ................................................................ 0.1kg per unit
Video bandwidth ........................................................ Maximum TMDS clock frequency 165MHz,4.95Gbps
Resolution and distance .............................................. 1080P      164ft (50meters)-CAT5e/6
720P/1080i  262ft (80meters)-CAT5e/6
Audio formats ........................................................... 8-channel, support Dolby TrueHDand DTS Master
TMDS input signal ...................................................... 1.2 volts (point to point)
DDC input signal ........................................................ 5 volts (point to point)
Indicator ................................................................... Power-green, video link-yellow
HDMI interface standard ............................................ HDCP 1.2, support CEC, EDID
Remote IR ................................................................. 20-60KHz 
ESD level .................................................................. HBM ±8 kV(Contact Discharge)
Temperature range .................................................... 0 ~ 40°C (operation), -20~60°C(stock)
Compliance ............................................................... FCC; CE; RoHS

PACKAGE CONTENTS

• 

 

EVWP2006 (TX & RX) 

• 

 

(2) IR Blasters (TX) 

• 

 

(1) IR Receivers (RX) 

• 

 

(1) DC 12V in line power supply

• 

 

Product Manual 

Содержание Evolution EVWP2006













Отзывы: