www.vanco1.com
800.626.6445
8
SOFTWARE USER INTERFACE
1. COM Port: Select the COM Port of the PC’s USB port that will be used to connect to the switcher
2. OUTPUT: Select the desired resolution, also able to set both inputs, or separate resolutions for each
input
3. VIEWING MODES: (From left to right) Single source, PIP, Side-by-Side (4:3), and Side-by-Side (16:9)
4. PIP MODES: Select the desired position of the PIP tile (upper left, upper right, lower left, and lower right)
5. PIP SIZE: Select the desired size of the PIP tile
6. RESET: Reset to Factory Default
7. FIRMWARE UPDATE: While connected and with the switcher turned on, locate the appropriate .bin file
(Vanco will provide any f/w updates to the product page on www.vanco1.com) that is saved to your PC.
Use “Open” to locate the file, then click on “Upgrade” to perform update.
