www.vanco1.com
800.626.6445
7
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to
the HDMI inputs (IN 1 and IN 2)
2. Connect a display such as an HDTV or HD Projector to the HDMI output (OUT)
3. OPTIONAL: Connect the provided RS-232 cable from the switcher to a PC or 3rd party integration system
for external control
4. For power, connect the provided power supply
At this point the display connected should display the source signal connected to the switcher If no signal is
being displayed, check all HDMI cables connected. If a display is having difficulty receiving a signal, access the
display’s menu and adjust the resolution (lowest to highest until signal is displayed). A 24 Hz vertical refresh
rate may work better than 60 Hz or higher.
