www.vanco1.com
800.626.6445
6
PANEL DESCRIPTIONS
EVSP12SC
1
2
3
6
7
1. Power LED: Illuminates when the splitter is connected to power
2. Micro-USB Port: Connect the included 5V DC power supply to power the unit
3. EDID MODE: Default EDID mode has been tested for compatibility with most source and display
combinations, however to manually adjust EDID, see below for DIP Switch adjustments
NOTE: The default settings on the DIP Switch is “OFF” for both switches. OFF is in the “Up” position, while ON
is in the “Down” position
4. Input Signal LED: Illuminates when the source is connected and powered on
5. HDMI IN: Connect a source such as a Set Top Box, Game Console, media player, NVR/DVR, etc.
6. Output Signal LED: Illuminates when a display is connected and powered on
7. HDMI OUT 1-2: Connect HDMI displays to each output
NOTE: Automatic EDID learning will detect all the connected HDMI displays and will analyze the content. The
maximum resolution support will automatically be chosen unless manually adjusted as shown above in the EDID
table; Connect the lowest resolution display to output 1
5
4
Dip Switch Position
Description
Off
Off
Ultra HD (4K@60) - 8/10/12bit 3D HDR video & 7.1 ch audio
On
Off
Ultra HD (4K@60) - 8/10/12bit 3D HDR video & 2 ch audio
Off
On
Ultra HD (1080p@60) - 12bit 3D video & 7.1 ch audio
On
On
Learning EDID from output 1
