www.vanco1.com
800.626.6445
5
1. POWER SWITCH: Toggle switch that turns the splitter unit ON or OFF
2. POWER LED: Illuminates when the splitter is connected to power
3. UTP LINK STATUS: Illuminates when the UTP outputs are connected to the EVRX2006 or EVWP2006RX
receiver units (sold separately)
4. HDMI OUT STATUS: Illuminates when a display is connected to “HDMI OUT” port and is powered on
5. HDMI IN STATUS: Illuminates when the source is connected and is powered on
6. UPDATE: Firmware update port (available f/w updates will be available on the product page on www.
vanco1.com, under the “downloads” tab)
7. HDMI IN: Connect a source such as a Set Top Box, Game Console, or media player/streamer
8. HDMI OUT: Connect an HDMI display such as an HDTV or Projector; this port can also be used to cascade
or daisy-chain to another splitter, to create additional outputs
9. IR RX/IR TX: Connect the included IR accessories to the correct IR ports; see IR section for setup and
explanation
10. EDID: Adjustment dial for EDID management, see EDID section for setup and explanation
11. UTP OUTPUT PORTS 1-7: Connect a single Cat5e/6 home run cable to the EVRX2006 or EVWP2006RX
receiver; connect the EVRX2006 or EVWP2006RX receiver to an HDMI display such as an HDTV or
Projector
12. DC 12V IN: Connect the included power supply to power the unit
PANEL DESCRIPTIONS
1
2
3
5
6
7
8
9
10
11
12
4
