Vanco Evolution EVEXHDB3, Руководство пользователя

Страница: 6 / 20

www.vanco1.com 800.626.6445 6
PANEL DESCRIPTIONS
1. Power LED: Illuminates when the unit is powered on
2. Link LED:
Light on: Transmitter and Receiver are connected and communicating
Light flashing: Transmitter and Receiver are in Low Power Mode (check cabling, home-run cabling should
be utilized with no coupling points)
Light off: No connection between Transmitter and Receiver
3. Video LED
Light on: The video is encrypted and able to be passed to Receiver
Light flashing: The video is not encrypted
Light off: No HDMI input signal detected
4. ARC LED:
Light on: The device is switched to the ARC mode, the receiver will receive eARC/ARC signals from an
eARC/ARC equipped display, and will pass signals via the Cat6/6a/7 cable to the Transmitting unit.
Light off: The device is switched to the SPDIF mode
5. SPDIF LED
Light on: The device is switched to the SPDIF mode. In this mode, the optical input on the Receiving unit
will be passed to the Transmitting unit, and then can be broken out via the SPDIF out or HDMI loop-out
Light off: The device is switched to the ARC mode
6. SELECT Button: Used for switching between the ARC and SPDIF modes
7. L/R IN/OUT Switch: Switch to left, the L/R IN/OUT port is the audio embedding port; Switch to right, the
L/R IN/OUT port is the audio de-embedding port
8. Loop Out/Audio Only Switch: Switch to left (LOOP-OUT), the HDMI OUT port is the loop-out port for the
HDMI IN port (source signal); Switch to right (AUDIO ONLY), the HDMI OUT port outputs 720P black
screen image, and the audio is from ARC or SPDIF signals from the Receiving unit
8
9
6
7
3 5 4 1 2
Transmitting Unit
10
11
14
12
15 13 16
19 17
20
18
21
22