www.vanco1.com
800.626.6445
5
PANEL DESCRIPTIONS
1
2
3
4
5
6
Transmitting Unit
7
1.
Power Indicator
2.
DC 24V: Connect the included power supply (PoC feature allows for either Transmitter or Receiver to be
plugged into power)
3.
HDBaseT Out: Connect a single Cat5e/6 that runs to the display location (home-run cable strongly
recommended)
4.
HDMI IN: Connect a source such as a Cable box, Blu-ray player, game console, PC, etc.
5.
IR TX: Connect the included IR Transmitter (TX); see IR section for setup
6.
IR RX: Connect the included IR Receiver (RX); see IR section for setup
7.
SPDIF OUT: (Optical Out) Digital audio output, connect to an external amplifier or audio system using an
optical audio cable
8.
CONFIG: Dipswitches to set audio output for ARC, see ARC section for setup
8
Dip Switch Number
CEC Function
ARC Function
Notes
1
2
3
OFF
OFF
OFF
CEC bypass
ARC controlled by the
source and settings
Default Settings; preferred setting
if display and amplifier are the
same brand or have the same ARC
language
OFF
ON
OFF
CEC ON
OFF
ARC pass-through is off
OFF
ON
ON
CEC ON
ON
If the default setting does not
produce audio, try this setting as this
forces audio handshake
ARC Setup (Configuring Dip Switch Settings)
The EVEXARC1 can pas-through ARC, which can be activated or deactivated. See below for dip switch
settings. Please note that DOWN is ON.
