background image

www.vanco1.com

800.626.6445

4

SPECIFICATIONS

Interface (Transmitter) ............................................... HDMI input, IR output (3.5mm), IR input (3.5mm), 
RJ45 Ethernet interface, 24V Power Input, SPDIF Optical Audio Output
Interface (Receiver) .................................................... HDMI output, IR output (3.5mm), IR input (3.5mm), 
RJ45 Ethernet interface, 24V Power Input 
Video Bandwidth ........................................................ Maximum TMDS clock frequency 165MHz, 4.95Gbps 
Resolution and distance .............................................. 1080P@60Hz up to 164ft (50m) Cat6; 
720P/1080i up to 270ft (80m) Cat6
HDMI Interface Standard ............................................ HDMI 1.4
Remote IR ................................................................. 20-60Hz wide frequency carrier
ESD Level ................................................................. HBM ±4 kV (Contact Discharge)  
Operating Temperature ............................................... 0~ 40 degrees C; 32~ 104 degrees F
Storage Temperature ................................................. -20~ 60 degrees C; -4~ 140 degrees F
Compliance ............................................................... FCC; CE; RoHS

PACKAGE CONTENTS

• 

EVEXARC1 HDBaseT Extender

• 

IR Emitter

• 

IR Receiver

• 

24V DC Power Supply 

• 

Mounting Hardware

• 

Product Manual

Содержание EVOLUTION EVEXARC1













Отзывы: