www.vanco1.com
800.626.6445
7
OPERATION CONTROL - IR
REMOTE CONTROL
1. INPUT/OUTPUT Switch - Push the corresponding button on the remote to select Input & Output port.
Ex: Select Input 2 to Output 3 - The button highlighted in the red circle button shown below to select Input 2
to Output 3
2. Function Key
Button
Function
OFF
Standby mode
ON
Power on the matrix switcher
STATUS
Preset output status
SAVE
Save current mapping mode
PRESET
Preset mapping mode
DEFAULT EDID
Begin default EDID selection
LEARN EDID
Begin EDID learning from one output
CLEAR
Clear the previous IR operation procedure
TAKE
Trigger the previous setting
F1 Reserved
F2 Reserved
