Vanco EVMX4016 Скачать руководство пользователя страница 3

Страница: 3 / 32

www.vanco1.com

800.626.6445

INTRODUCTION

The Evolution by Vanco EVMX4016 16X16 Matrix with HDBaseT Technology, Wide-band IR, and PoE is

an HD switching and extension system that comprises of an 16 input/16 output matrix unit. Have 16

sources displayed simultaneously on any display or have a single source duplicated on multiple displays,

flexibility for the perfect solution. Features HDBaseT (70m/230ft) technology, which allows for audio,

4K 2160p/30hZ video, IR, and Power over Cable to be transferred over a single Cat5e/6/7 cable.

Extends 1080p resolutions up to 230ft (70m) over a single Cat5e/6 cable and 2160p/30hZ (4K2K)

resolutions up to 131ft (40m). Also features Power over Ethernet (PoE) Technology which transmits

power over Cat5e/6, allowing for Receiver unit to be powered without the use of a power supply. The

result is an easy and plug and play solution that allows each output with the ability to extend HDMI over

long distances in conjunction with the Evolution by Vanco HDBaseT (70m/230ft) receiver EVRX3000

(sold separately). Features additional HDMI output per HDBaseT output for flexibility or mirroring

capability, able to handle up to 32 displays. With an output bandwidth of 6.75 Gbps, the EVMX4016

is capable of high definition video and multi-channel audio distribution with simple control using the front

panel or remotely via IR Receivers at display locations. Includes RS-232 connectivity for third party

integration for control and switching, as well as IP control along with LAN connectivity for IP control

and switching remotely, using a smartphone or tablet. Also features EDID management system, which

allows and encourages device communication compatibility for seamless integration. For longer length

applications with full flexibility for control, the EVMX4016 is a great solution.

FEATURES

Содержание EVMX4016

































Результаты поиска

Содержание EVMX4016

Отзывы:

Похожие инструкции для EVMX4016

Бренды по названию

Популярные бренды

Vanco EVMX4016, Руководство пользователя

Результаты поиска

Содержание EVMX4016

Отзывы:

Похожие инструкции для EVMX4016

Бренды по названию

Популярные бренды