Vanco EVMX4016 Скачать руководство пользователя страница 2

Страница: 2 / 32

www.vanco1.com

800.626.6445

1. Do not expose this unit to water,

moisture, or excessive humidity.

2. Do not install or place this unit

in a built-in cabinet, or other

confined space without adequate

ventilation.

3. To prevent risk of electrical shock

or fire hazard, due to overheating

do not obstruct unit’s ventilation

openings.

4. Do not install near any source of

heat, including other units that

may produce heat.

Do not place unit near flames.

6. Only clean unit with a dry cloth.
7.

Unplug unit during lightening

storms or when not used for

an extended period of time.

A surge protector is strongly

recommended.

8. Protect the power cord from

being walked on or pinched,

particularly at the plugs.

9. Use unit only with accessories

specified by the manufacturer.

10.

Refer all servicing to qualified

personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal

and the same video resolution and audio settings on all electronic equipment in the

system. When there are multiple sources and displays, the video resolution and

audio setting on all connected units must be adjusted to correspond with that of the

display having the lowest video and audio capability.

WARNING

DEAR CUSTOMER

Thank you for purchasing this product.

For optimum performance and safety, please

read these instructions carefully before connecting,

operating or adjusting this product. Please keep this

manual for future reference.

This product is 100% inspected and tested in the United

States to verify HDMI performance parameters.

Содержание EVMX4016

































Результаты поиска

Содержание EVMX4016

Отзывы:

Похожие инструкции для EVMX4016

Бренды по названию

Популярные бренды

Vanco EVMX4016, Руководство пользователя

Результаты поиска

Содержание EVMX4016

Отзывы:

Похожие инструкции для EVMX4016

Бренды по названию

Популярные бренды