www.vanco1.com
800.626.6445
3
INTRODUCTION
The Evolution by Vanco EVEXHDB2 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power
over HDBaseT (PoH) extends 4K/60Hz, 4:4:4 with HDR along with audio, Ethernet, and RS232 at a distance of up to
230ft/70m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 330ft/100m. Power over HDBaseT (PoH)
Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of
a power supply. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain.
The EVEXHDB2 also has the ability to expand networking setup, by extending Ethernet along with HDMI signals over the
single Cat5e/6 cable, allowing for two RJ45 jacks on the transmitting and receiving ends to hardwire any network capable
components. In addition, RS-232 and bi-directional IR pass-through allows for source and/or display control. For extending
full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the EVEXHDB2 is a great plug and play solution
for connecting the latest components!
The EVEXHDB2 includes two units: transmitting unit (EVEXHDB2-TX) and receiving unit (EVEXHDB2-RX). The transmitting
unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The
receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEXHDB2
offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect
solution for any application.
FEATURES
HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender
Part # EVEXHDB2
•
Features the latest HDBaseT Technology, optimized for whole-home or commercial distribution of high-
definition signals at much greater distances of standard HDMI cables
•
Transmission Range: Extends 4Kx2K@60Hz, 4:4:4 with HDR up to 230ft/70m over a single Cat5e/6
cable and 1080p@60Hz up to 330ft/100m
•
Features Power over HDBaseT (PoH) Technology which transmits power over Cat5e/6, allowing for either
Transmitter or Receiver to be powered without the use of a power supply
•
Virtually Lossless Compression retains high end audio and video quality
•
4-10/100 Ethernet ports for directly connecting displays and sources to a network
•
Bi-directional IR and RS232 control
•
Features Auto EDID and EQ Management for plug and play installation
•
HDR Compatible
•
HDCP 2.2 compliant and backward compatible to previous versions
•
CEC Support
•
Slim and compact design
•
Power Supply: DC 24V
•
Dimensions: 5.9 W” x .6” H x 4” D