4
70V/100V Configuration
The total number of speakers multiplied by the tap value cannot exceed
the output power (in watts) of the 70V/100V amplifier. The example below
shows 5 total speakers. Using the 10W taps, you will need an amplifier with
at least 50W (5 speakers x 10W tap). A good rule of thumb is to select an
amplifier with 20% greater power; in this case, an amplifier that delivers
about 62W.
Taps
OUT
1. Black: Common or Negative wire which connects to the common or
negative terminal of an additional cascaded speaker.
2. White: 10W/8 Ohm or Positive wire which connects to the voltage or
positive terminal of an additional cascaded speaker.
