VANCO INTERNATIONAL
2
STEP 1
Make out the signal input port first, and then connect antenna signal output port to the amplifier input port with coaxial cable.
STEP 2
Position the 75 ohm coaxial cable as requested, install F female connector to the cable.
STEP 3
Insert the power supply “F” Connector to 12V DC on AMP202 then plug into the socket of 120V 60 Hz, now the amplifier is
available.
Safety notice:
1. Don’t connect the amplifier to TV/Video/Radio before carefully reading the User’s Manual.
2. Read the instructions carefully before installation.
3. Please follow the diagram to install needed electrical devices.
4. Indoor use only! Do not expose this appliance to rain, sunlight, water or a wet location (i.e. bathtub, wash bowl, kitchen sink,
laundry tub or swimming pool, etc.). Note, the apparatus should not be exposed to dripping or splashing liquids and no objects
filled with liquids, such as vases, should be placed on it.
5. Do not insert any metallic object through the ventilation grills. Do not use this product near naked flame sources, such as a
lighted candle.
6. Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other
Hazards. Refer all servicing or repairs to a qualified service technician.
Vanco International
Batavia, IL 60510, USA
www.vanco1.com
AMP202
12VDC IN
OUT1
12VDC IN OUT2
IN
12VDC IN
Reverse path
Forward path
