Vanco 280688 Скачать руководство пользователя страница 3

Страница: 3 / 26

www.vanco1.com

800-626-6445

FEATURES

The Vanco 280566 HDMI 6x6 and 280688 8x8 4K Matrix Selector Switches allow 6 and 8

HDMI sources to be distributed to up to 6 and 8 displays simultaneously. Have multiple sources

displayed simultaneously on any display or have a single source duplicated on multiple displays,

flexibility for the perfect solution. These matrix units are capable of up to 4K2K (2160p @30Hz)

Ultra High Definition resolution and HD multi-channel audio distribution with simple control using

the front panel buttons, included IR remote, remotely via IR Receivers at display locations, and

RS-232/IP/web control! Also features EDID management, which allows and encourages source

and display “handshake” for seamless integration. In addition, 280566/280688 is also equipped

with RS-232 and LAN connectivity which allows for firmware updates, EDID management,

renaming inputs/outputs, switching control, etc. For reliable, no-nonsense HDMI distribution and

control on a budget, over short distances, the 280566/280688 Matrix Selector Switches are a

great choice for any application.

HDMI® 8x8 4K2K Matrix Selector Switch

Part # 280688

• Allows up to 8 HDMI sources to be distributed

simultaneously to up to 8 displays

• Supports resolutions up to 1080p@60 Hz, 48-

bit deep color, 4K@ 30 Hz

• Advanced EDID management for rapid

integration of sources and displays

• Dolby TrueHD and DTS-HD master audio pass

through HDMI output

• Full 3D pass through

• Choose from 4 switching modes – Front Panel

buttons, IR remote control, RS-232 control,
and TCP/IP control

• HDCP Compliant
• Wideband bi-directional IR pass-through (20 to

60 kHz) (8 IR Transmitters and 9 IR Recievers
included)

• Dimensions: 17.25” (438mm) W x 1.63”

(41mm) H x 7.19” (182mm) D

Содержание 280688



























Результаты поиска

Содержание 280688

Отзывы:

Похожие инструкции для 280688

Бренды по названию

Популярные бренды

Vanco 280688, Руководство пользователя

Результаты поиска

Содержание 280688

Отзывы:

Похожие инструкции для 280688

Бренды по названию

Популярные бренды