background image

SECTION 5: MAINTENANCE

VIPER DIESEL

PAGE - 16

090058-OP_r0 (AUGUST-2014)

VANAIR MANUFACTURING, INC.

(800) 526-8817 • www.vanair.com

Vanair

®

 Manufacturing, Inc. especially

requires that a consistent service regimen be
established for engine oil changes, and
engine and compressor air filter servicing.
The following schedule is designed so that
many of the other maintenance tasks are
completed when the engine and compressor

air filters are serviced, and the engine oil is
changed.

Please take a moment to acquaint yourself
with the service schedule presented in

Section 5.3 (5.3A for compressor; 5.3B for
engine)

 to assist the customer in

establishing a maintenance routine log.

For assistance in obtaining routine
maintenance or replacement parts, consult

Section 7.1, Parts Ordering Procedure

,

and 

Table 7A: Recommended Spare Parts

List.

NOTE

Follow the prescribed periodic 
maintenance (PM) schedule as 

recommended. Perform the required PM 

schedule at recommended intervals. 

Failure to follow this prescribed periodic

maintenance at the recommended 

intervals will impair the package safety, 

performance characteristics, shorten the 

package’s life, and will negatively affect 

the warranty coverage

of the package.

WARNING

Follow all applicable safety 

recommendations as outlined in 

Section 

1: Safety

 of this manual.

Содержание Viper Series








































































Отзывы: