SECTION 1: SAFETY
AIR N ARC
®
150 SERIES
PAGE - 6
090043-OP_r0 (MARCH-2015)
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
Before working on generator, remove spark
plugs or injectors to keep engine from kicking
back or starting.
Block flywheel so that it will not turn while
working on generator components.
1.5.4
HOT PARTS CAN CAUSE
SEVERE BURNS
Do not touch hot parts bare
handed.
Allow cooling period before
working on equipment.
1.5.5
ENGINE EXHAUST GASES CAN
KILL
If used in a closed area, vent
engine exhaust outside and
away from any building air
intakes.
1.5.6
ENCLOSED SPACES CAN
CAUSE A BUILD-UP OF NOXIOUS
FUMES AND OVERHEATING
Do not use in enclosed
spaces where deadly
exhaust gases can build up
and machine can overheat,
causing fire.
1.5.7
BATTERY ACID CAN BURN SKIN
AND EYES
Do not tip battery.
Replace damaged battery.
Flush eyes and skin
immediately with water.
1.5.8
ENGINE HEAT CAN CAUSE FIRE
Do not locate unit on, over,
or near combustible
surfaces or flammables.
Keep exhaust and exhaust
pipes way from flammables.
1.5.9
EXHAUST SPARKS CAN CAUSE
FIRE
Use approved engine
exhaust spark arrester in
required areas — see
applicable codes.
1.6 COMPRESSED AIR
HAZARDS
1.6.1
BREATHING COMPRESSED AIR
CAN CAUSE SERIOUS INJURY
OR DEATH
Do not use compressed air
for breathing.
Use only for cutting,
gouging, and tools.
1.6.2
ENCLOSED SPACES CAN
CAUSE A BUILD-UP OF NOXIOUS
FUMES AND OVERHEATING
Do not use in enclosed
spaces where deadly
exhaust gases can build up
and machine can overheat,
causing fire.
