Vanair AIR N ARC RELIANT 250 Series, Руководство по эксплуатации и список запасных частей

Страница: 24 / 184

INTRODUCTION AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - 2 090019-OP_r0
RPM of the engine. This RPM drop will reduce the
voltage output of the AC generator, which can cause
damage to power tools being used. The operator must
monitor the AC voltage at all times to ensure proper
voltage output.
This publication contains the latest information available
at the time of preparation. Every effort has been made to
ensure accuracy. However, Vanair
®
Manufacturing, Inc.
takes no responsibility for errors or consequential
damages caused by reliance on the information
contained herein.
Vanair Manufacturing, Inc. reserves the right to make
design change modifications or improvements without
prior notification.
A NOTE ON MANUAL
LAYOUT NAVIGATION
Refer to Figure M-1 . This manual is presented in a two-
column per page sequence. As shown in the figure, the
inner columns represent the machine application data in
a continuous page-by-page flow. The outer columns are
reserved for auxiliary information relating to the specific
data put forth in the inner column. This auxiliary data can,
for example, be a relative warning or note detail. It will
support the concept which is listed nearby in the inner
column.
Sometimes, if an illustration is too large to fit in the outer
column, or if a large table matrix is present, it may occupy
the two-column space of a page. In such cases the inner
column will always be continued on the next available
page after the illustration.
KEY DESCRIPTION
A INNER PAGE COLUMNS:
Main text flow of information layout represents the main
body of machine applications divided into sections and
sub-sections.
B
OUTER PAGE COLUMNS:
Contain auxiliary information such as notes, warnings,
and small illustrations. This information is related, and
will be located in proximity, to the main, inner page col-
umn application.
Figure M-1: Manual Layout Navigation
B A A B