SCALE OF ITEMS WILL VARY TO AID VISUAL IDENTIFICATION
PHASE 4: RB140-02 FRONT CROSSBAR FIXING KIT
Assembly & Installa
Ɵ
on Guide
RB140-4 - QUAD CROSSBAR KIT
REF: 699-0710-06b
RB140-4:
QUAD CROSSBAR KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
FROM THE FIXING KIT SUPPLIED, ONLY THE ITEMS
AND QUANTITIES LISTED BELOW ARE REQUIRED
1
4: NUT RETAINER - x4
Part No:
802-0098
5: M6x20mm SET A2 - x8
St.Steel
1: LEFT-HAND FOOT - x1
Part No:
702-1634-PCBAC
10: M6 T NYLOC NUT A2 - x8
St.Steel
St.Steel
6: M6x30mm SET A2 - x2
St.Steel
8: M6 FMC WASHER A2 - x8
St.Steel
3: FOOT PROTECTION STRIP - x2
Part No:
812-0204
2: RIGHT-HAND FOOT - x1
Part No:
702-1633-PCBAC
9:
1/
4
x
3/
4
’’ REPAIR WASHER - x2
7: M6 SQ SPRING WASHER A2 - x2
St.Steel
A:
B: LOOSELY ATTACH
NUT RETAINERS AS SHOWN ONTO BOTH FEET BRACKETS (1 & 2).
LOCATE M6x20mm SET (5) INTO ALL NUT RETAINERS (4) AS SHOWN ABOVE.
IMPORTANT
LOOSELY ATTACH
REPEAT ON BOTH
FEET BRACKETS
4 & 5
5
4
5
2
INSERT EACH 1750mm PVC STRIP INTO CROSSBAR, CUT A 1152mm PIECE FROM EACH.
A:
B:
IMPORTANT: IF LOAD STOPS ARE REQUIRED, THE FORWARD STOPS WILL NEED TO BE FITTED NOW.
LOCATE EACH PREVIOUSLY CUT PIECE OF PVC STRIP 224mm FROM END OF CROSSBAR.
‘X’ WILL BE
REFERRED DURING
FS1 INSTALLATION
11
52mm
DIMENSION T
AKEN FROM END OF PVC STRIP
RET
AIN EXCESS FOR LA
TER ST
AGE
1600mm CROS
SBAR
1750mm PVC S
TRIP
CUT 1
152mm PIECE O
F PVC STRIP
1750mm PVC S
TRIP
1152mm PVC STRIP
1152mm PVC STRIP
FIT LOAD STOPS
IF REQUIRED
REFER TO FS1
INSTRUCTION
IMPORTANT
224mm (’X’)
SLIDE NUT RETAINERS (4) ATTACHED TO LEFT-HAND FOOT (1) INTO 1600mm CROSSBAR AS SHOWN.
IMPORTANT: ENSURE THE CORRECT FOOT BRACKET IS USED AND IN THE CORRECT ORIENTATION
4
4
1
1600mm EXTRUDED CROSSBAR
(REMAINING RB-1600 BAG)
IMPORTANT
LOOSELY ATTACH
ENSURE CORRECT
FOOT BRACKET
IS USED (ITEM 1)
3
IDENTIFY AND DETERMINE THE CORRECT LOCATION AND ORIENTATION OF EACH FOOT BRACKET.
VIEW ILLUSTRATED WILL BE AS SEEN FROM THE REAR
ITEM 1:
LEFT-HAND FOOT
x1 HOLE
ITEM 2:
RIGHT-HAND FOOT
1600mm EXTRUDED CROSSBAR
FEET BRACKETS
MUST BE LOCATED
AS SHOWN
IDENTIFY FOOT BRACKET USING IDENTIFICATION HOLES SHOWN
PLEASE FAMILIARISE YOURSELF WITH THE CORRECT LOCATION
AND ORIENTATION OF EACH FOOT BRACKET, ONCE CLEAR ON
CORRECT POSITIONING PROCEED ONTO STAGE 4
x2 HOLES
(AT FRONT)
(AT FRONT)
x2 HOLES
1 & 2
8
10
