3 & 4
SCALE OF ITEMS WILL VARY TO AID VISUAL IDENTIFICATION
PHASE 2: RB140-01 MID REAR CROSSBAR FIXING KIT
Assembly & Installa
Ɵ
on Guide
RB140-4 - QUAD CROSSBAR KIT
REF: 699-0710-04b
RB140-4:
QUAD CROSSBAR KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
FROM THE FIXING KIT SUPPLIED, ONLY THE ITEMS
AND QUANTITIES LISTED BELOW ARE REQUIRED
1
3: NUT RETAINER - x4
Part No:
802-0098
4: M6x20mm SET A2 - x8
St.Steel
1: MID FOOT - x2
Part No:
702-1632-PCBAC
9: M6 T NYLOC NUT A2 - x8
St.Steel
St.Steel
5: M6x30mm SET A2 - x2
St.Steel
7: M6 FMC WASHER A2 - x8
St.Steel
2: FOOT PROTECTION STRIP - x2
Part No:
812-0204
8:
1/
4
x
3/
4
’’ REPAIR WASHER - x2
6: M6 SQ SPRING WASHER A2 - x2
St.Steel
A:
B: LOOSELY ATTACH
NUT RETAINERS AS SHOWN ONTO BOTH FEET BRACKETS (1).
LOCATE M6x20mm SET (4) INTO ALL NUT RETAINERS (3) AS SHOWN ABOVE.
IMPORTANT
LOOSELY ATTACH
REPEAT ON BOTH
FEET BRACKETS
4
3
4
1
7
9
SLIDE NUT RETAINERS (3) ATTACHED ONTO FEET (1) INTO 1600mm CROSSBAR AS SHOWN.
2
3
1
1600mm EXTRUDED CROSSBAR
(ANY RB-1600 BAG CAN BE USED)
IMPORTANT
LOOSELY ATTACH
USE ANY RB-1600
1600mm CROSSBAR
NOTE: THE FEET BRACKETS ARE IDENTICAL SO CAN BE LOCATED AT EITHER END.
FEET BRACKETS
CAN BE FITTED
EITHER SIDE
IMPORTANT
x1 ITEM 2
HOLES ARE
OFF-CENTRE
ENSURE THEY
MATCH FOOT
PROCEED TO
NEXT PHASE
IMPORTANT
TAKE CARE,
USE HAND TOOL
WE ADVISE
ROOF PLUGS ARE
RETAINED
REMOVE PLUGS
TAKE CARE WHEN REMOVING ROOF PLUGS, IT IS ADVISABLE TO EASE OUT WITH A HAND TOOL
USING A 5mm ALLEN KEY, REMOVE FACTORY FITTED ROOF PLUG AT LOCATIONS INDICATED ‘ ’.
3
L1 L2
L1 L2
1600mm EXTRUDED
CROSSBAR
ATTACH FEET BRACKETS ONTO VEHICLE AS SHOWN AT LOCATIONS INDICATED ‘ ’.
4
NOTE: AS FEET BRACKETS ARE IDENTICAL THEY CAN BE FITTED EITHER SIDE OF VEHICLE.
FEET BRACKETS
CAN BE FITTED
EITHER SIDE
IMPORTANT
LOOSELY ATTACH
6
5
8
2
