Van Raam easy go, Руководство пользователя

Страница: 24 / 32

23
User manual
Easy Go 16.05
Maintenance and adjustments by owner
Below you can find the instructions for maintenance and adjustments that you can do
yourself on a regular basis, which will keep your scooter bike in top condition
.
Cleaning
The frame of the scooter bike can be cleaned with a damp cloth. For areas that are
dirtier you can use a mild detergent.
The wheels can be cleaned with a moist brush with plastic hairs (not a wire brush!).
The seat, the grips and the backrest can be cleaned with mild soap and water.
Do not use a pressure washer or a steam cleaner!
The right lubricant
The chain should be cleaned and maintained at regular intervals (every three months
approximately). Only use special chain grease or Tevlon spray. This is the only way
to make sure that the chain will run smoothly, will stay water resistant and will not
rust.
1. Wipe the chain with a cloth.
2. Treat it with grease or spray.
3. Remove any excess lubricant with a rag.
Other parts should
not be treated with a lubricant.
Inspection of the scooter bike
It is recommended that the scooter bike has a yearly inspection carried out by the
dealer to claim
warranty. Please use the form “Form service, maintenance,
modifications an warranty claims” in the back of this manual. After 200 kilometres or
after a period of two months the scooter bike should be inspected.
In the event of technical trouble or faults, the scooter bike should be taken to the
dealer for repairs
immediately .
The replacing of safety-related components (especially frame, brakes, lighting,
handlebars, front fork and actuation) should be performed by the dealer.
If you still decide you want to replace components yourself, you are responsible for
damage or harm due to incorrectly fitted components.
Only use
original Van Raam spare parts, which you can buy at you dealer. If
requested the dealer will make the necessary information on repair and maintenance
available.