Van Raam easy go, Руководство пользователя

Страница: 22 / 32

21
User manual
Easy Go 16.05
Walking-stick holder
The walking-stick holder is fitted under the
seat. The walking-stick(s) should be fixed
using the velcro band [A].
Flashing light system
The scooter bike is optionally fitted with
four flashing lights. (two in front and two in
the rear)
To operate the flashing lights you press
the switch [A] to the left or right.
When you want to turn off the flashing light
installation, you should keep the switch in the
middle.
The flashing lights work on batteries.
The batteries are present only in the front
lights, the rear lights are connected to them.
To replace the batteries, loosen the screw of
the cap and take the orange cap [B] away.
Then remove the PCB [C] from the holder.
You can now replace the battery [D].
This is a 3 volt lithium battery of the type
CR123A.
Batteries cause environmental
pollution. Follow the local
regulations during disposal.
[A]
[A]
[C]
[B]
[D]