Van Medevoort CT360D, Инструкция по эксплуатации

Страница: 7 / 10

vM CT360 STEREO CD TRANSPORT
6
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications

12 13 14 15 16
12. Output digital OPTICAL. SPDif optical output TosLink.
13. Output digital RCA. SPDif output RCA.
14. Output digital XLR. AES / EBU balanced output.
15. Output digital Q-Link. Output to connect the CT360 via Q-Link for I2S connection to e.g. the
vM DA converters. There are four RCA connectors: for the DATA, MCK, LRCK en BCK. The
MCK is the master clock input, the other three are outputs. Connect these to the same
named connectors on the converter.
For best audio results, it is important to use four identical cables of good quality.
Take care to use the right signal direction of the cables!
Separate the MCK cable from the other three cables to reduce influence.
This Q-Link output will be operational when the MCK from the DAC is received.
16. IEC Power Chassis Connector. To be connected with the proper wall socket, which must be
earthed or grounded. Every Van Medevoort product is optimized
for your country’s electrical
standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be changed. Please check that your
product is set to the correct voltage setting BEFORE connecting to an AC power outlet.
Any faulty connection will invalidate the warranty.