BTP-2002NP Installation manual
- 4 -
12
－
Cutter acting blade
13
－
Printer platen
14
－
Cutter fixed blade
15
－
Paper end sensor
For continuous paper, this sensor is
used to detect whether the paper roll
has run out.
16
－
Paper-width-adjust module
There are 4 long slots at the base of paper holder, putting the
paper-width-adjust module in different slot will allow the printer to use
different width papers listed as follows:80
±
0.5 mm, 76
±
0.5 mm, 69.5
±
0.5 mm, 57.5
±
0.5 mm. Removing the paper-width-adjust module will
allow a paper width 82.5
±
0.5mm.
Caution:
Paper-width-adjust module is an indispensable part of printer
and should be kept safely.
17
－
Top cover position sensor
The sensor is used to detect whether the top cover is closed or not.
