BTP-2002NP Installation manual
- 9 -
Caution:
Adjust the paper width by adjusting the paper-width-adjust module
according to the paper type used.
Make sure that the paper roll is cut according to the requirement below
before loading:
Make sure that the heat sensitive side of paper faces the print head and
the rolling direction of paper meets the requirements.
The paper roll should be kept from being loose. Or it may cause paper
jam or other malfunction.
The paper roll should be balanced in the paper holder and not be inclined
because it can affect paper auto loading and printing.
4) Pull the end of the paper roll out up to the end of the top cover, and close
the printer cover. See figure below.
Caution:
Both sides of the printer cover must be
pressed down completely, fail to do so will
influence the normal operation of the
printer.
The edge of paper should not leave at the
paper exit as shown in the above figure.
