Carefully secure the top middle bracket to the double skinned roof support channel
using No8x1/2” self-tap screws (FX4090). If the support channel is covered with trim
this will need removing.
Carefully drill 3.2mm through the fixing holes on the bottom return into the floor of
the vehicle and secure using No8x3/4” self-tap screws (FX4091).
Arrange the remaining fixing brackets so you are familiar with each one.
Position the bulkhead assembly with the bottom return looking into the cab area
and the wings against the vehicles ‘C’ pillar. Once happy with the position of the
bulkhead carefully drill 3.2mm through the fixing holes on the wings and secure to the
pillar using No8x1/2” self tap screws (FX4090).
IN8182 - PAGE 3 OF 5
5
6
7
8
ME0958
X1
(BRACKET 1)
ME0959
X1
(BRACKET 2)
ME0960
X2
(BRACKET 3)
ME0962
X4
(BRACKET 5)
ME0963
X6
(BRACKET 6)
LOOKING A
T BULKHEAD
FROM CAB AREA
LOOKING A
T BULKHEAD
FROM CAB AREA
