VG284-3 - PAGE 3 OF 3
Once in position tighten all fixings to 8Nm.
Periodically check all fixings.
6
NOTES:
Maximum load is 55kg per bar. Please check that the vehicle manufacturers
load bearing capacity for the roof is not exceeded. (Refer to the vehicle
handbook)
Periodically check all fixings.
Retain these instructions for future reference.
TIGHTEN
TO
8Nm
Flex the top hat covers over the top hat brackets into position as shown below. Ensure that the covers click into the
front and rear of the top hat brackets.
5
1.
2.
3.
4.