The front roof brackets are handed to suit both sides of the vehicle and are angled to suit the slope of the roof. The
brackets need to be positioned on the vehicle as shown below with the top hat flange facing inwards.
VG284-3 - PAGE 2 OF 3
1
Secure roof brackets to the vehicles fixing points
using M6x16 hex bolts, M6 shakeproofs & rubber
washers. Ensure that the top hat flange is facing inwards.
3
Place roof bars onto the roof brackets with the t-slot
facing upwards, secure using top hat brackets,
M6x16 coach bolts & M6 serrated nuts.
4
Remove roof plugs to reveal the vehicles fixing
points.
2
FRONT (HANDED) - ILLUSTRATION SHOWS OFFSIDE
MIDDLE
REAR