SUPPLIED COMPONENTS
This section will require the following parts. All side panels must be secured to
the floor. Quantities shown below are to suit one side panel.
FX4002
X3
(M8 NYLOC NUT)
FX4011
X2
(M8 FLANGE NUT)
FX4040
X8
(M8 WASHER)
FX4048
X2
(M8X50 COACH BOLT)
FX4140
X3
(M8X50 HEX BOLT)
ME0918
X1
(SUITS STRAIGHT PANELS)
ME2058
X1
(SUITS TAPERED PANELS)
IN8377 - 07 OF 12
Trade Van Racking can be attached to a vehicle using various methods,
including rivets, nuts and bolts, self-tapping screws, and riv-nuts. The
following steps outline our recommended and crash-test approved
method for securing the racking unit to the floor of a vehicle.
01
RECOMMENDED VEHICLE FLOOR FIXING METHOD (1 OF 3)
?
TOOLS REQUIRED
TAPE MEASURE
X1
DRILL (Ø8.5mm)
X1
13MM
X2
