Van Der Stahl V-301 Series, Руководство по эксплуатации

Страница: 23 / 40

V-301Series Operating Instructions 3.02E
23
[Essential tools] Scissors, a Phillips screwdriver
[Replace when] The heating element breaks often, the
seal becomes messy, etc.
The glass tape and Sarcon sheet are either sold
individually or included in the maintenance parts kit.
1
Referring to
“10-1 How to shift fluoro glass
sheet”
and
“10-2 Heating element
replacement”
, remove a fluoro glass sheet and a
heating element.
2
Completely remove the glass tape and Sarcon
sheet under the heating element.
3
Cut the new Sarcon sheet 2mm longer than the
seal area for left and right sides and adhere it to
the lever.
4
Adhere the glass tape over the Sarcon sheet so it
covers the electrode about 5mm.
10-3 Glass tape and Sarcon sheet
replacement
Electrode
Sarcon sheet
25mm-width
glass tape
About 2mm About 2mm
About 5mm
Holder
Seal area length
About 5mm
Attention
Applying the Sarcon sheet and glass
tape to a surface with adhesive
residues will negatively affect the
sealing surface.
Attention
If the adhesive of the Sarcon sheet is weak
when replacing the glass tape, please
replace the Sarcon sheet as well.
Adhere the glass tape over the Sarcon sheet.